H. Kuhnke Ltd, Romsey, UK
Tel: 01794 514445 Email Us

Solenoid Company rotary solenoids

R Series Rotary Solenoids

Ex-stock

This design is stocked in 3 sizes, each of which will rotate 95° clockwise when energised. When de-energised the intergral spring returns the shaft to its original position.

Body size is to the nearest mm exluding the shaft which passes through the body.

PDF note:
Note that the PDF drawings may also show the full range of this product. For more details of this range please visit the Rotary Solenoids sections of this site.

Model	Body Size mm	Rotation	Max torque in Ncm
R29	25 x 25dia	95°	0.35
R39	27.5 x 35dia	95°	1.20
R59	41.5 x 50dia	95°	15.00

IMPORTANT NOTE
These solenoids prefixed with the leter R are the standard stock versions of the Kuhnke D series rotary solenoids. Most D series solenoids are built to order with over 500 possible variations.

The solenoid company can supply any DC voltage, other body sizes etc, please enquire.

PDF Datasheets
link	size
R29	79kb
R39	81kb
R59	78kb

 

The R Rotary Solenoid.

Part number explanation. The different variations of R series solenoids are coded into the part number which is is made up of 4 components. We have shown these here in the headings A to D. Explanations are shown below the table.

A	B	C	D
R	29	24VDC	100%
	39
	59

A = Design Series, in this case all rotary
B = Body size
C = Voltage, in this case all 24VDC
D = Duty cycle, in this case all 100%
Note all these solenoids are supplied with flying leads.

Force is shown in gf [1 Newton = 100gf]
1gf = 0.1N; 1kgf = 10N
These standard stock solenoids include a return spring. The shaft passes through the body. Rotation is defined looking at the solenoid from the drive shaft end.