H. Kuhnke Ltd, Romsey, UK
Tel: +44 (0)1794 514445 Email Us

Solenoid Company

Linear Solenoids > Two Directional UH

A shorter stroke (0 - 4mm) solenoid that can develop up to 28 Newtons at 5% duty cycle, or 8 Newtons at 100% duty cycle (as an example with infinite variations inbetween). This is a combined thrust and pull type. The compact device comprises of two coils for operation and return. Each is energised seperately. When one coil is energised the plungers move in one direction and remain there whilst the coil remains live. When the second coil is energised, and the first coil de-energised, the plungers move in the opposite direction. There is no centre position.

Overall dimensions are 23mm x 21mm x 52mm excluding the plungers at each end. All dimensions can be viewed on the datasheet.

The most common voltage is 24VDC but these can be wound for most DC voltages.

PDF Datasheets
UH two directional Linear Solenoids	81kb

 

The Solenoid Company
H. Kuhnke Ltd
21 Abbey Enterprise Centre
Premier Way
Romsey, Hants, SO51 9AQ
UK

 

Kuhnke UH series. Two coils for separate movement in each direction. Combined thrust and pull.

Part number explanation. The different versions of UH solenoids are coded into the part number which is made up of 5 components, which we have shown here in the headings A - E. Explanations are shown below the table.

A	B	C	D	E
UH	2	F	24	100%ED
		L

A = Design, in this case UH
B = Size, 2
C = Connections, F = flying leads, L = soldered pins
D = Voltage in DC
E = Duty cycle, can be any percentage