H. Kuhnke Ltd, Romsey, UK
Tel: 01794 514445 Email Us

Solenoid Company HL Solenoids

Linear Solenoids > Standard HL

A standard open frame linear solenoid design which combines both thrust and pull (the Kuhnke H range is either/or). There are 3 body sizes to choose from. Depending on the model, this range offers stroke lengths up to 6mm ranging up to 20mm. Standard model numbers are HL218, HL318 and HL618. An internal return spring can easily be included if required.

Body sizes range from 21mm x 25mm x 36mm to 38mm x 45mm x 50mm excluding plunger. The available force depends on duty cycle, stroke and chosen body size with the entire range offering up to 39 Newtons at 6% duty cycle, or 8 Newtons at 100%.

The most common voltage is 24VDC but these can be wound for most DC voltages.

PDF Datasheets
HL standard Linear Solenoids	114kb

 

The Solenoid Company
H. Kuhnke Ltd
21 Abbey Enterprise Centre
Premier Way
Romsey, Hants, SO51 9AQ
UK

 

Kuhnke HL series . A core range product in 3 standard sizes, with combined thrust and pull.

Part number explanation. The different versions of HL solenoids are coded into the part number which is made up of 5 components, which we have shown here in the headings A - E. Explanations are shown below the table.

A	B	C	D	E
HU	218	F	24	100%
	318	A
	618

A = Design, in this case HL
B = Size 218, 318, 618
C = Connections, F = flying leads, A = push on connector
D = Voltage in DC
E = Duty cycle