H. Kuhnke Ltd, Romsey, UK
Tel: 01794 514445 Email Us

Solenoid Company - Standard Linear Solenoids

Linear Solenoids > Standard H

A standard linear solenoid range. This open frame design is available in 9 body sizes to suit a wide selection of industries and applications. Depending on the model, this range offers stroke lengths from 2mm, ranging up to 20mm. There are thrust and pull versions. Standard model numbers are H08, H09, H12, H24, H32, H42, and H62.

Body sizes range from 8mm x 10mm x 16mm up to 38mm x 44mm x 50mm excluding plunger. The available force depends on duty cycle, stroke and chosen body size, with the entire range offering up to 100 Newtons at 5% duty cycle or 15 Newtons at 100%.

The most common voltage is 24VDC but these can be wound for most DC voltages.

PDF Datasheets
H Standard Linear Solenoids	338kb

 

The Solenoid Company
H. Kuhnke Ltd
21 Abbey Enterprise Centre
Premier Way
Romsey, Hants, SO51 9AQ
UK

 

Kuhnke H series . A core range product in 6 standard body sizes, in either thrust or pull versions.

Part number explanation. The different versions of H series solenoids are coded into the part number which is made up of 9 components, which we have shown here in the headings A - F. Explanations are shown below the table.

A	B	C	D	E	F
H	08	03	F	24	100%
H	09	06	A
H	12	43
H	22	46
	24
	32
	34
	42
	62

A = Design, in this case H
B = Size 08, 09, 12, 22, 24, 32, 34, 42, 67
C = 03 and 06 pull type, 43 and 46 thrust type
D = Connections, F = flying leads, A = pushon connector
E = Voltage in DC
F = Duty cycle