H. Kuhnke Ltd, Andover, UK
Tel: +44 (0)1264 364194 Email Us

Solenoid Company V Series Heavy Duty

Linear Solenoids > Heavy Duty V

A standard closed frame linear solenoid that develops much greater force than open frame designs of the same size. Each of the 4 models is a combined thrust and pull type. Stroke lengths are dependent on model, from a maximum of 2mm to a maximum of 20mm. Model numbers V13, V30, V45 and V65.

Body sizes range from 13mm x 13mm x 43mm to 65mm x 65mm x 90mm excluding plunger. The available force depends on duty cycle, stroke and chosen body size with the entire range offering up to 500 Newtons at 5% duty cycles, or 180 Newtons at 100%.

The most common voltage is 24VDC but these can be wound for most DC voltages.

PDF Datasheets
V Heavy Duty Linear Solenoids	137kb

 

The Solenoid Company
H. Kuhnke Ltd
Unit 6 Focus 303
Focus Way, Walworth Business Park
Andover, Hants, SP10 5NY
UK

Telephone: +44 (0)1264 364194
Fax: +44 (0)1264 365991

 

Kuhnke V series . Closed frame solenoids for high power output. 4 sizes, thrust and pull combined.

Part number explanation. The different versions of V solenoids are coded into the part number which is made up of 5 components, which we have shown here in the headings A - E. Explanations are shown below the table.

A	B	C	D	E
V	13	F	24	100%
	30
	45
	65

A = Design, in this case V
B = Size 13, 30, 45, 65
C = Connection, F = flying leads N= plug in socket
D = Voltage in DC
E = Duty cycle