Linear solenoids and miniature linear solenoids

H. Kuhnke Ltd, Romsey, UK
Tel: 01794 514445 Email Us

Linear Solenoid

Linear Solenoids

Miniature Linear Solenoids

Open frame design, thrust or pull, Kuhnke MM series & similar up to 5 Newtons at low duty cycles, and for strokes below 2mm.

Open frame design, thrust or pull Kuhnke HM series and similar, up to 8 Newtons at low duty cycles, and for strokes below 10mm.

Open frame design, thrust or pull kuhnke HU series and similar, up to 4 Newtons at low duty cycles and for strokes below 7mm where space is at a premium.

Standard Linear Solenoids

Open frame design, thrust or pull Kuhnke H series. A range of 6 standard designs for strokes up to 20mm and typical force of 100 Newtons at low duty cycles.

Open frame design, thrust and pull type Kuhnke HL solenoids. 3 standard frame sizes for strokes up to 6, 12 and 20mm and up to 10, 15 or 30 Newtons at low duty cycles.

Heavy Duty Linear Solenoids

Closed frame design, thrust and pull type Kuhnke V series solenoids. 4 standard frame sizes for strokes up to 2, 8, 15 and 20mm and up to 15, 20, 150 and 500 Newtons at low duty cycles.

Closed frame design, thrust and pull type kuhnke RM solenoids. 11 standard tubular frame sizes, for strokes up to 40mm and over 1000 Newtons at low duty cycles

Two Directional Linear Solenoids

Two direction solenoids comprise a pair of solenoids combined to operate in one direction then the other. Designs are based on standard linear solenoids. Standard products are:
Kuhnke UH open frame, up to 4mm stroke 28 N at 5% duty cycle.

Kuhnke UV closed frame, up to 8mm stroke and 100N at 5% duty cycle.

Kuhnke URM 20 and URM 50 fully encapsulated tubular frame, up to 8mm stroke and 200N at 5% duty cycle.

We have prepared a table showing all of these products, standard options, operating temperatures and typical force per duty cycle which you can download as an overview datasheet.